SpaceLogger-RS

The range of SpaceLogger models

Compare the features of the SpaceLogger models:

	TextLogger	WindLogger
Logging interval	Logs continuously	Logs continuously or select logging interval from one sample per 2 sec, 5 sec or 10 sec
Data sample	Records all data received	Records only the data between specified start (STX) and end (ETX) characters
Time stamping	None	- Yes, each data sample will be time stamped. - Time-stamping may be disabled if preferred. - Back up battery for real-time clock
File format	All data is appended to one LOGFILE1.TXT file	- Data is stored in daily files. - Default format is .CSV; other extensions may be specified. - Each file name includes the date.
Data input format	RS232 ASCII or binary data, 8 bits and no parity (default). Or select from: 8 bits and even or odd parity or 7 bits and even or odd parity.	RS232 ASCII data, 8 bits no parity
Baud rate	Select from: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200, 300, 110. Default = 9600	Select from: 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200, 300, 110. Default = 9600
Data output	Yes, may be set up to output data either: - exactly as received from data source, or - in format stored on card. Only possible when logger powered on, memory card inserted & card not full.	Yes, may be set up to output data either: - exactly as received from data source, or - in format stored on card. Only possible when logger powered on, memory card inserted & card not full.
Data output format	RS232 data, 8 bits no parity	RS232 ASCII data, 8 bits no parity
Typical applications	- RS232 printer replacement - Load cell logging - Equipment operating cycle data recording	- Wind data recording - Weather station data logging - NMEA data logging - Other RS232 sensor monitoring
Customisable for OEM applications	Yes	Yes
	TextLogger data sheet (PDF)	WindLogger data sheet (PDF)
	Buy Now	Buy Now

SpaceLogger is a trademark of Richard Paul Russell Ltd