Richard Paul Russell Ltd
Home > Products > SpaceLogger-RS > TextLogger > Specification
| Physical | Enclosure dimensions |
Width: 67 mm Depth: 67 mm Height: 28 mm (excluding optional rubber feet) |
| Weight | 75g | |
| Enclosure material | GP ABS (UL94-HB) plastic and acrylic | |
| Power Supply | Supply voltage | 7 - 30 V dc |
| Supply current (at 12V dc) | 10 mA typical | |
| Supply input protection | Polarity reversal protected and internal fuse – 500 mA slo-blo® (Littelfuse type 0454500 or equivalent) | |
| Connection options (both included) | 1.3 mm centre pin DC connector, or Screwless terminals (0.32 to 0.64 mm diameter conductors) | |
| Interface | RS232 serial input | Selectable Baud Rate - 9600 Baud (default) or 2400 Baud |
| Wire acceptance | 0.32 to 0.65 mm diameter (AWG 28 to 22) | |
| Data Storage | Data storage card | Removable MMC mobile |
| Data capacity | 2 GByte (max) | |
| File system |
FAT16 or FAT32 with 8.3 file names Sector size 512 Bytes |
|
| Audio/Visual Indicators | LED indicators |
Ready to record data (green LED) Writing data to MMC mobile card (red LED) |
| Audio bleeper |
Two tone signal on correct card insertion Continuous tone when buffer full Single tone when data purge button depressed |
|
| Environmental | Temperature range |
Operating: -25°C to +70°C Storage: -40°C to +70°C |
| Enclosure protection | IP203 | |
| EMC |
EMC Directive 89/336/EEC - CE marked (Emissions: EN61326:1997 inc A1/A2/A3:2003, EN60945:1997 Immunity: EN61326:1997) FCC/CFR 47: Part 15:2004 |
|
| The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change. | ||
SpaceLogger is a trademark of Richard Paul Russell Ltd
view
cart